This is a general guideline for using Sporicidin® brand products in the cleaning and disinfection of surfaces and materials contaminated with blood, bodily fluids or other potentially infectious materials (OPIM). Please consult your local health department, OSHA, EPA or the Centers For Disease Control (CDC) for a more detailed explanation on how to safely and effectively clean up blood or bodily fluids.
Bloodborne pathogens clean up can expose cleaning crews to dangerous, and sometimes lethal, infectious diseases such as Human Immunodeficiency Virus (HIV), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV). Medical studies have shown that HBV can survive for over two weeks in dried blood, and HCV can thrive for up to two weeks. It is extremely important that cleaning crews be properly trained and take every precaution to protect themselves from the hazards associated with the project.
An essential aspect of every bloodborne pathogens clean up is the use of an appropriate disinfectant to kill the potential pathogens. OSHA considers Tuberculocidal disinfectants, such as Sporicidin® Disinfectant products, to be fully compliant and capable of killing potential bloodborne pathogens. Sporicidin® Disinfectant products offer an excellent safety profile with an overall EPA Toxicity Rating of Category IV – Very Low Toxicity and provide the added benefit of continuous residual bacteriostatic protection for up to six months. Sporicidin® enzyme cleaners contain special enzymes to break down proteins, starches and lipids, such as those found in human blood and tissue, making clean up easier and faster. Sporicidin® products may be applied with sponge, towels, trigger sprayer, pressure sprayer, or ULV fogger/mister.
OSHA’s Occupational Exposure To Bloodborne Pathogens Standard (29 CFR 1910.1030) requires that employers provide the necessary personal protective equipment and training for employees to protect themselves from potential exposure hazards, as well as how to effectively clean and dispose of infectious materials.
II. RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT (PPE)
III. RECOMMENDED TOOLS & EQUIPMENT
NOTE: The use of high temperature solutions or cleaning methods may cause contaminates to solidify and set into semi-porous or porous materials making them harder to remove
IV. RECOMMENDED CLEANING SUPPLIES
V. RECOMMENDED SPORICIDIN PRODUCTS
VI. SITE PREPARATION & ENGINEERING CONTROLS
VII. HARD SURFACE CLEANING & DISINFECTION
VIII. POROUS SURFACE CLEANING & DEODORIZING
Effective cleaning and deodorizing of porous and semi-porous materials can be a challenge and items that tend to absorb excessive amounts of blood/body fluids should be discarded and replaced.
1. Unsalvageable Materials – Carpet, rugs, mattresses, pillows, furniture cushions, upholstery and other fabric items saturated with blood/body fluid should be discarded in the following manner.
A. Remove Excess Contamination – Scrape or scoop excess contamination or debris from affected area.
B. Excise Contaminated Sections -- Cut out and remove blood/fluid saturated sections of the unsalvageable material.
C. Decontaminate Excised Sections – Thoroughly wet cut out sections with Sporicidin® Disinfectant and place in double-bagged biohazard bag for disposal.
D. Decontaminate Remainder of Unsalvageable Object – Dampen remaining surfaces of the unsalvageable item with Sporicidin® Disinfectant and place in a double-bagged biohazard bag or cover with stretch wrap/clear plastic sheeting and seal with biohazard tape or tag prior to discarding.
2. Salvageable Materials – Semi-porous and porous Items with light blood/fluid soiling or splatters may be cleaned and deodorized with Sporicidin® products.
NOTE: The use of high temperature or heat cleaning methods may cause contaminates to solidify and set into the materials making them harder to remove.
A. Remove Excessive Contamination – Remove visible contaminates or debris from surface by gently scrapping or blotting. Avoid the use of excess pressure to minimize forcing liquid contaminates deeper into the material.
B. Cleaning – Use Sporicidin® enzyme products to clean, deodorize and remove stains.
i. Apply diluted Sporicidin® Enzyme Mold Stain Cleaner or Enzyme Cleaner to affected area and gently work product into material and let dwell for 2-3 minutes.
ii. Clean and extract affected area with room-temperature water using a carpet or upholstery cleaning machine. Repeat until debris and staining is removed.
iii. Blot or air-dry.
C. Deodorize – Use Sporicidin® Disinfectant products to remove germs and neutralize offensive odors.
i. Apply Sporicidin® Disinfectant product to affected area and gently rub or work into material.
ii. Allow to remain damp for 10 minutes.
iii. Blot or air-dry.
NOTE: In situations where occupants might suffer from severe allergies or chemically-induced sensitivities, the restorer may opt to extract the treated areas using a carpet or upholstery cleaning machine and warm water as a final step to the deodorizing process.
IX. EQUIPMENT & PERSONAL PROTECTIVE EQUIPMENT CLEANING AND DISINFECTING
NOTE: Refer to the PPE manufacturers specified cleaning and maintenance instructions.
X. REGULATED WASTE DISPOSAL
Cleaning materials soiled with blood or bodily fluids, such as paper towels, cloths, sponges, and mop heads, should be placed in double-bagged trash bags, sealed with tape, labeled and disposed of as hazardous materials in accordance with local and state regulations. Sporicidin® products can be disposed of by pouring the liquid down the regular sanitary sewer and discarding the empty container in the regular trash. Follow local regulations.
For additional information, contact our office toll free at 1-800-424-3733 or visit our web site at www.sporicidin.com. Click here to download the PDF version of this page.